IIC - 145
HOT AIR OVEN & INCUBATOR
COMBINED (TWIN MODEL)
Precise Hot Air
Drying & Sterilization & Incubation in one chamber.
Two door i.e. one for Oven 4 One
Incubator in single body.
Unique design of Ventilation keeps the
surface of Instruments from being burnt even when the equipment temperature
maintained at 150-200°C.
Polish 304 grade Stainless Steel Sheet
Corrosion resistant long life having adjustable shelves to make more space
for different height.
Kanthal super quality Air Heater duly
embedded on the side & bottom for accuracy.
Best quality Bi-Metallic Hydraulic
Thermostat / Full feature Temperature Controller On Customer Request).
Applications:
For Storage of pharmaceutical Agriculture, Sterilization Food & Medical
Industries, Bio Tech requiring contri Temperature above ambient
 |
| Model |
IIC 145 |
IIC 145 A |
| Capacity (Ltrs.) |
28 Ltrs. |
45 Ltrs. |
| Interior (mm) |
300 x 300 x 300mm |
350 x350 x350mm |
| Heater "W" Wattage |
For Oven 1.0 KW.
For Incubator 450W |
For Oven 1.0 KW.
For Incubator 450W |
| Shelves |
1/2 |
1/2 |
| Price Ihermoslatics |
36,000.00 |
40,000.00 |
| Price Digital PID |
46,000,00 |
50.000.00 |
|
|
Technical Parameters :
Control Panel Fitted in
- The side having : Mains 4 Load Indicator Temperature Controller,
Mains Switch
- Optional : Digital Temperature Controler Cum Indicator
Microprocessor Based PID Temp. Controller Cum Indicator
AirCirculation Fan
- Temperature Range : For Oven Ambient to 250°C±1°C
For Incubator 70°C±1°C
- Material : CRC/MS Sheet duly Powder Coated Double Colour Gate/Top
Grill
- Power Consumption : 220/230V AC Supply Single Phase 50 HZ
- Duty Cycle : Continuous
IIC - 146
ROTARY VACUUM EVAPORATOR (BUCHI
TYPE)
 |
|
|
|
|
Consist of an evaporating Flask rotated by a
non-sparking induction Motor in a heating water Bath. Vacuum Distillation of
solvent at high and low Temperature is achieved quickly and efficiently by
use of speed controller provided. It prevents foaming an vacuum and bumping
of the liquid. Other application includes vacuum drying of powders and
slides. Low temperature vacuum distillation of heat sensitive is suitable
compounds. The introduction tube permits continuous feed of the liquids into
evaporating flask and also distillation under Controlled atmosphere. The
evaporating Flask, Pear shaped to give a larger surface area for
evaporation, is clamped to a glass duct which goes through the drive unit
and protrudes 120 mm into the condenser. The Condenser is screwed into the
drive unit and contains a Teflon inletfeedtubeat its upper end. Condenser is
fitted with Standard B-19 joint at top and spherical joint S-35 at the
bottom for receiver flasks.
Drive unit with F. H. P. Motor, Speed
Regulator, Working on 220Volts A. C. 50
Cycles, 1 Phase.
Stand:- Heavy Cast Stand with Steel Rod.
Evaporating Flask 1 Litre (approx.) with
Standard B-29 joint.
Glass Duct All Glass connector cone with
B-29, Connected Evaporating Flask and Protrudes in the condenser.
With Clip to hold the Evaporating Flask
with Glass Duct.
Condenser Double Coil Condenser for
water Circulation, fitted with Vacuum Connection and standard S-35, ball
joint for
Receiving Flask with Condenser.
Receiving Flask 1 Litre Capacity with
Standard S 35 Ball Joint.
Ball Joint clamp:-To hold the Receiving
Flaskwith Condenser.
High Vacuum Cock: Two way stop-forthe
feeding Tube and Vacuum Release. Feed Tube.
Complete with all accessories, glass
part vacuum pump etc as per model No. IIC -146B
|
| Model |
IIC 146 A |
IIC-146 B (complete with all
accessories |
|
|
Available In Size
Capacity 1 Liter, 2 Liter, 3 Liter
Optional
Water Bath Thermostate Controlled or Digital Controlled. As per
requirement.
Lifting Jack (Manual).
Vacuum Grease.
