General Lab Instruments

Working Table of S.S. 304 grade.Body of construction can be of Wodden/Mild Steel/Stainlesss Steel

HEPA of 0.3 u of an efficiency of 99.97% down to 0.3u media is of glass fiber &, made of pleated back &, frow made of aluminium foil &, packed in a anodized aluminium frame.

Pre filter of dry fiber washable type with the frame.

Air flow: 70% recirculation 8s 30% exhaust.

Statically balanced motor blower assembly.

Outer casing MS sheet duly painted having provision for capillary
     & Thermometer for testing.

Velocity at output of HEPA is 90+20 FPM.

Static Pressure Manometer.

Transparent front Door.

Normal working fluorescent light.

UV light IX 15/30 watts.

Gas cock.

Available In :-

• Class-II, Type-A2 .
• Class-II, Type B2 (Total Exhaust Model)

Options :-

1. Virus Burnout System
2. HEPA fllter in Exhaust
3. Magnehelic Gauge
4. Glove Port

SIZE :-
2'X2'X2'
3'X2'X2'
4'X2'X2'
6'X2'X2'

Vibration type variable speed genie short rapid electronic stroke motor drives.

Neoprenecup in parts vigorous agitation to tube or small flask.

Shaking starts when vessel is pressed against cup.

Fitted with Vacuum Rubber at the bottom to prevent walkin.

Outer casing made of MS/CRC sheet duly to painted/Powder coated.

Applications:
Reliable German electronic control with production display

OPD system:
This optical production display system helps in monitoring the production of ice-cubes faster and easier.

Stainless Steel Machine and Storage Bin:
Unlike other ice cube machines, our machines have stainless steel (SS) body not only from outside but also from inside, which makes the machine durable and long lasting.

Automatic Flushing/Cleaning after every cycle:
Now you dont need to waste your time and energy on cleaning of the machine. These machines are equipped with automatic flusher, which cleans it after every cycle of hour (approx.) while in operation, which ejects the unhygienic water in drain.

No Pumps/No Gear Motors:
That means the production cycle is very simple resulting in very low maintenance..

No Nozzles:
No lime deposition in the ice preparation system, no disturbance, no spraying noise. Low electricity and water consumption: The machines are designed keeping in mind the lowest electricity and water consumption.

Puff Insulated Ice Bin:
This helps in keeping the ice hard and in shape for long.

Bullet Shape Round Ice Cubes

Precise, Hot Air Drying.

Better Mineral / Blanket Insulation for high Temperature & to avoid heat loss.

Silent Hot Air Blower, Unique design of Air Circulation provide throughout uniform Air movement.

Unique design of ventilation keeps the surface of the instruments from being Burnt even when the instruments i.e. Oven Temperature maintained at 200^°C.

Polish / Hair Line 304 grade S. Steel sheet interior, long operation, corrosion resistant.

Kanthal A-1 Super quality coil shaped & Air heater tubular model wound on side/on the back of the Oven for better accuracy.

Full feature with Digital Temperature Controller cum Indicator having Alarm facility (On Customer request).

Toughened Glass view window to observe /Test the material without disturbing the Temperature condition of the chamber.

Working Temperature required as per IS: ASTM is 163°C ± 1 ^°C.

Provide with detachable metal shaft (Both for Loss on Heating /Thin Film Oven).

Reduction gear is fitted from outside rotated by a vertical shaft having 5-6 RPM.

APPLICATIONS :
For Bitumen Testing Loss of weight, softening Paint, Penetration Loss of wt in Bitumen & Flux Oils (For Construction / Koad Projects Department/ Industries)

Technical Parameters :

• Control Panel : Mains & Load Indicator Fine Temperature Controller, Digital TemperatureController, Fan Switch, Rotating
                              Motor, Control Switch.
• Temperature Range : Ambientto±250^°C
• Temperature Stability : ±1°Cmax
• Material : CRC / MS sheet duly powder coated
• Power Consumption : 220/230V AC Supply 50 HZsingle Phase
• Safety Function : Temp. Overshoot Alarm
• Interior : S. Steel 304 Grade Steel Sheet
• Temperature Setting : 1^°C
• Temperature Sensitivity : 1^°C
• Optional : RS 232 Communication interface